Rugged Ridge Textured Black Front Bumper Base with Winch…
The XHD (Extreme Heavy Duty) Short Base comes in two designs; Integrated Winch Mount for use with almost any aftermarket winch (including the new Warn Power Plant with optional mounting blocks #11540.15) and Light Mount Base with two light mounting locations. The Short Base attaches quickly to the frame with two enclosed D-Ring mounting brackets. This four bolt frame mount design provides the toughest bumper attachment found anywhere while creating two overbuilt pull points. This bumper mounts close in on the frame rails, drawing the bumper closer to the body and increasing the approach angle. The narrow overall width gives enormous clearance for the front tires. Each Short Base includes two protected cut outs for your JK's factory fog lamps. Built in euro-guards protect the fog lamps from the elements while creating an easy mounting point. Each Short Base includes side filler plates to close off the ends for a finished look.
KC Hilites Front Winch Mount Lite Bar – Jeep Wrangler TJ…
KC Hilites Black Front Lite Bars' sleek design features the convenience of light bumpers without the typical weight, bulk or installation hassles. These bars are forged from 1-3/4" steel tubing and come with a black powder-coated finish. They mount to factory bolt holes without any drilling and are equipped with 5 light mount tabs.
Superwinch EPi9.0 24V DC Winch 9035 9000LB
EPi9.0, 24 V DC winch, 9,000lbs./4082 kgs. single line pull with roller fairlead, PB and 15' remote - **Powers Load IN and OUT **Automatic Load Holding Brake **Quiet, Efficient, Full Metal 3 Stage Planetary Gear Box **Freespooling Clutch for Fast Wire Rope Payout **Efficient 4.6 hp Series Wound Motor **Heavy Duty Sealed Contactor **Durable Handheld Remote Switch on 15' Lead **Heavy Duty Roller Fairlead -- Roller fairlead does not attach directly to the winch **Pulley Block **Rated Line Pull (Bottom Layer) 9,000 lb. (4,082 kg) **Motor 4.6 hp, series wound **Gearing 3 Stage Planetary **Gear Ratio 156:1 **Freespooling Clutch Lift and turn **Braking Automatic 100% Load Holding **Wire Rope 21/64 in. x 125' (8.3mm x 38.1m) **Dimensions 23.35 in. l. x 6.26 in. d. x 7.13 in. h. **(593mm l. x 159mm d. x 181mm h.) **Drum Diameter 2.5 in. (64mm) **Drum Length 9 in. (229mm) **Weight 114 lb. (51.8 kg) **Switching Method 15' Rubber Handheld Remote **Switching Mechanism Heavy Duty Sealed Contactor
Rugged Ridge Gloss Black Tube Front Bumper With Winch Cutout…
|
 List Price: unavailable Sale Price: $370.75 Availability: unspecified 
|
Bestop 42902-01 HighRock 4X4 Black Rear Bumper
Bestop HighRock 4X4 Black Rear Bumper is developed specifically for the hard core rock crawler and city driver. It features a high-access, rock crawler design for greater off-road clearance. This bumper is conventional, yet stylish and is constructed with an E-Coat undercoating and black powder-coated structure for added protection.
MBRP Front Full Width Winch Bumper 130924
Do you want a bumper that is as tough as it looks? Off Camber fabrications delivers. Built tough to handle whatever you throw at it. Constructed from 3/16" steel plate and featuring 1/4" steel plate mounting brackets. Accommodates most major manufacturers 9.5k and some 12k winches within the bumper body.
Superwinch SuperMount Cradle Mounting Kit 65010A
Superwinch SuperMount Cradle Mounting Kit includes portable winch mounting system, mounting base and handle. It is designed to offer economical and an easy solution to mount a winch on the vehicle. This mounting kit fits into 2-inch front and rear receiver hitch. It also works with DC winches. This mounting kit consists of all hardware to facilitate easy installation. It is backed by 1 year warranty for defects in materials and workmanship.
OR-Fab Stinger Winch Mount Bumper With Center Winch Mount…
OR-Fab Stinger Winch Mount Bumper With Center Winch Mount For 2007-10 Jeep Wrangler JK **Main bumper section constructed from 3/16th inch steel plate **Stinger Hoop **.120 wall tube **Set at 44 degree angle **Gusseted for added strength **Winch cable guide with laser cut OR-FAB Logo **Reinforced 3/4 inch d-ring mounts **Allows for steep approach angles **Mounts to OE bumper location **Available in Wrinkle Black **1/4 inch steel winch plate **Laser cut for precision fit **Heavy duty d-rings included
Rugged Ridge Textured Black XHD Front Bumper System Short…
The XHD (Extreme Heavy Duty) Short Base comes in two designs; Integrated Winch Mount for use with almost any aftermarket winch (including the new Warn Power Plant with optional mounting blocks #11540.15) and Light Mount Base with two light mounting locations. The Short Base attaches quickly to the frame with two enclosed D-Ring mounting brackets. This four bolt frame mount design provides the toughest bumper attachment found anywhere while creating two overbuilt pull points. This bumper mounts close in on the frame rails, drawing the bumper closer to the body and increasing the approach angle. The narrow overall width gives enormous clearance for the front tires. Each Short Base includes two protected cut outs for your JK's factory fog lamps. Built in euro-guards protect the fog lamps from the elements while creating an easy mounting point. Each Short Base includes side filler plates to close off the ends for a finished look.